Color Organ Triple Deluxe II is the return of the classic color organ of the 70′s using LEDs. Color Organ divides sound wave into three bands; low, mid, & high, and lights different color LEDs based on the volume.


Color Organ Triple Deluxe II uses all discrete transistor circuit for authentic “sound to light” function – no ICs, no microcontrollers. Assembly is also very straightforward and beginner friendly.

- See the instructables

- Download the schematics

- Checkout the Laser Cut Acrylic Case

Kit Contents

• 3x 47 ohm
• 6x 150 ohm
• 2x 270 ohm
• 1x 470 ohm
• 2x 1k ohm
• 2x 4.7k ohm
• 4x 10k ohm
• 3x 270k ohm
• 1x 1.2M ohm
• 1x 10k ohm potentiometer
• 1x 4.7nF (0.0047uF)
• 2x 22nF (0.022uF)
• 1x 0.22uF EC
• 1x 1uF EC
• 3x 4.7uF EC
• 1x 10 uF EC 16V or higher
• 1x 47uF EC 16V or higher
• 8x MPS2222A or Equivalent
• 18x LED (6x red, 6x green, and 6x blue)
• 3.5mm Stereo Jack
• DC Power Jack

Notes:
Kit assembly requires basic soldering skills.
You need a 12V DC power supply (AC adapter) (300mA or higher current capacity – such as this one) to operate Color Organ Triple Deluxe II. Use of regulated power supply is recommended, since non-regulated AC adaptors typically produce output voltage much higher than they are rated. (Typical “12V” non-regulated AC adaptors can output about 18V.) If you want to use one of those, make sure to masure the actual output voltage, and only use it if the voltage is lower than 15V. (Try 9V rated ones.)

*** Purchase Here ***

Follow

Share