Colour(Color) Night Joule Thief kit and PCB are available. Please use the buttons below to purchase.
Detailed information and building instructions are here: http://www.instructables.com/id/Colour-Changing-Night-Joule-Thief/
*** Purchase Here ***
Colour(Color) Night Joule Thief kit and PCB are available. Please use the buttons below to purchase.
Detailed information and building instructions are here: http://www.instructables.com/id/Colour-Changing-Night-Joule-Thief/
*** Purchase Here ***
Detailed information including building instructions: http://www.instructables.com/id/Colour-Changing-Night-Joule-Thief/
10 pack of 5mm RGB LED – common-cathode. Diffused plastic – same as the ones used for Aurora. (Also same as this one.)
5mm RGB LED – common-cathode 10 pack: $5.00 |
|
Universal High-Power LED Driver is a PIC microcontroller based switch-mode LED driver. This driver can boost or reduce the supply voltage to drive wide range of high power LEDs efficiently.
You can find the detailed information here:
http://www.instructables.com/id/Universal-High-Power-LED-Driver-with-3D-printable-/
*** Sorry, this product has been SOLD OUT and retired. ***
* If you live in Australia, you can purchase this kit from LED Sales.
For the last 4 months, I’ve been working on “practical” side of things, and finally released this.
It’s a “universal” LED driver that supply constant current to high power (1 – 3W) LEDs. With remote controllable dimming and up to 3A of peak output current makes this a “one size fits all” kind of driver for many of your LED lighting projects.
Detailed information is posted at instructables. (http://www.instructables.com/id/Universal-High-Power-LED-Driver-with-3D-printable-/)
Here’s a little addition that makes Auroras more desktop friendly. You can use this cord to power Aurora 9×18 mk2, Aurora 18×18, Aurora mini 18 or Aurora 9 bar and other kits from any USB ports. A standard USB plug on one end, and Molex 2 pin connector on the other end. About 24 inch long.
Read the rest of this page »
Aurora mini 18 is only 2 inches in diameter, yet controls 18 full-color (RGB) LEDs individually. The technology that enables this little thing is as amazing as the lights it produces.
Please review the instructables before purchase – assembly requires soldering skill. You will also need PIC programmer such as PICKit 3, ICD 2, ICD 3 (PICKit 2 doesn’t work with the PIC used). If you don’t have a programmer, you can purchase the PIC programmed with the latest firmware. (The PIC will be soldered to the PCB)
- Detailed technical information at instructables.com
- Aurora mini 18 part placement chart (PDF)
* Firmware update – download here *
*** Purchase Here ***
Thanks to your support, Aurora 9×18 kits are completely sold out.
Joule Thief circuit is combined with an ambient light sensor – Night Joule Thief is a little night light that keeps going with just one battery for weeks! Two white LEDs light up surprisingly bright.
* This is the original version of Night Joule Thief that uses white LEDs – not to be confused with the new color changing version.
Please view the instructables for technical info and assembly steps.
*** NOTE: The color of the PCB will be green instead of purple shown in some of the pictures. ***
*** Purchase Here ***
“Joule Thief” circuit is an inductor based voltage booster circuit to light LEDs with low supply voltage. The circuit was published in 1999 and has been quite popular. You can see the principle of the circuit here: http://en.wikipedia.org/wiki/Joule_thief
My version is a variation that uses single coil inductor, to make the inductor easily obtainable. I design the circuit using readily available parts only, to make it an ideal DIY project.
Please see the full article on Instructables (http://www.instructables.com/id/Joule-Thief-LED-Night-Light/)