Comments on: 9. PIC24FV16KA301 https://blog.theledart.com/blog Art and Technology are Friends Tue, 18 Aug 2020 10:01:26 +0000 hourly 1 http://wordpress.org/?v=3.9.1 By: Roy G https://blog.theledart.com/blog/aurora-9x18-mk2-assembly-guide/aurora9x18mk2_ppg_0009_09/comment-page-1/#comment-100748 Thu, 17 Aug 2017 05:14:09 +0000 http://www.theledart.com/blog/wp-content/uploads/2012/04/aurora9x18mk2_PPG_0009_09.gif#comment-100748 Truly unbelievable beauty! I stand in awe of
your talents. I just wanted to thank you for
making the boards available. I got both the
18×18 and the 9×18. Both came out great, no
problem in assembling ( to my surprise ),
worked great from the start. I made my own
audio board and I recommend anyone purchasing
either Aurora to invest in the audio as it
brings it to a higher dimension. Thanks again,
Roy

]]> By: The LED Artist https://blog.theledart.com/blog/aurora-9x18-mk2-assembly-guide/aurora9x18mk2_ppg_0009_09/comment-page-1/#comment-1181 Fri, 17 Aug 2012 19:24:48 +0000 http://www.theledart.com/blog/wp-content/uploads/2012/04/aurora9x18mk2_PPG_0009_09.gif#comment-1181 Great to hear that. Thank you for letting me know!

]]> By: Rox https://blog.theledart.com/blog/aurora-9x18-mk2-assembly-guide/aurora9x18mk2_ppg_0009_09/comment-page-1/#comment-1180 Fri, 17 Aug 2012 05:51:41 +0000 http://www.theledart.com/blog/wp-content/uploads/2012/04/aurora9x18mk2_PPG_0009_09.gif#comment-1180 Thanks, I got it working already, the reason was I missed/lost one resistor. I’m enjoying it now. playing music almost non stop and watching lighting effects, awesome!

]]> By: The LED Artist https://blog.theledart.com/blog/aurora-9x18-mk2-assembly-guide/aurora9x18mk2_ppg_0009_09/comment-page-1/#comment-1152 Mon, 13 Aug 2012 14:55:54 +0000 http://www.theledart.com/blog/wp-content/uploads/2012/04/aurora9x18mk2_PPG_0009_09.gif#comment-1152 Aurora “senses” the audio interface at the power up/reset. Also needs all 3 wires to be connected to the audio interface. Power cycle to reset Aurora while connectes to the audio interface and see if it recognizes.

]]> By: Rox https://blog.theledart.com/blog/aurora-9x18-mk2-assembly-guide/aurora9x18mk2_ppg_0009_09/comment-page-1/#comment-1147 Sat, 11 Aug 2012 06:59:52 +0000 http://www.theledart.com/blog/wp-content/uploads/2012/04/aurora9x18mk2_PPG_0009_09.gif#comment-1147 Thanks! its now alive! Audio interface is now under test… Analog output from the interface is ok, but no reactions from aurora.. pls advice.

]]> By: The LED Artist https://blog.theledart.com/blog/aurora-9x18-mk2-assembly-guide/aurora9x18mk2_ppg_0009_09/comment-page-1/#comment-1144 Fri, 10 Aug 2012 15:04:29 +0000 http://www.theledart.com/blog/wp-content/uploads/2012/04/aurora9x18mk2_PPG_0009_09.gif#comment-1144 One or more of ICSP connections might be either not connected or shorted. Please double check for PIC’s orientation, and soldering. Bad solder connections are hard to see sometimes. When in doubt, you can apply flux on the pins and run soldering iron on them.
Good flux is the key to successful SMT soldering…

]]> By: Rox https://blog.theledart.com/blog/aurora-9x18-mk2-assembly-guide/aurora9x18mk2_ppg_0009_09/comment-page-1/#comment-1143 Fri, 10 Aug 2012 14:46:42 +0000 http://www.theledart.com/blog/wp-content/uploads/2012/04/aurora9x18mk2_PPG_0009_09.gif#comment-1143 Recvd my kit and building it now. got stucked on programming the chip by this error:

Programming…
The following memory regions failed to program correctly:
Program Memory
Address: 00000000 Expected Value: 00000012 Received Value: 00000000
Programming failed

Please help.

]]>