Aurora 9 bar Kit
*** Sorry Aurora 9 bar Kit/PCB are discontinued. Please consider Aurora 12 bar instead. ***
All parts except Molex connectors and power supply are included. (See the picture for the contents.)
* The PIC microcontroller (PIC24F08KA101) is not pre-programmed. You need your own programmer (such as PICKit) to program the PIC microcontroller.
Please view my Instructable for the detailed information on Aurora 9 bar.
Follow
Hi, is there any chance of allowing access to the PCB .brd file (assuming you use Eagle that is). The parts I can source, this would allow me to get 3 PCB’s from Laen.
Thanks in advance
October 1, 2012 at 4:11 pm
Discontinued… that sucks. I wanted several to practice on before I moved on to the Aurora kits.
Please don’t discontinue!
Randy
September 7, 2012 at 5:45 pm
Hello Randy,
I’m sorry, but kits have to be made in batch (usually 25 to 100), so I will most likely lose money on this kit if I did another batch.
I will definitely develop something similar in the near future, so please stay tuned.
Aki
September 10, 2012 at 1:51 pm
Ok, I will wait. Sure did want one though!
September 13, 2012 at 1:52 pm
just thought u might want to know that the drop down menu says ‘walter clear’ when I think u meant to put water clear :)
July 11, 2012 at 10:30 pm
Can’t believe I did that! Thanks for letting me know!
July 11, 2012 at 10:33 pm
Hi,
I would like to know if this kit possible for using 10 LED instead of 9. Another thing using a 9V . I want to apply in my guitar.
Thank you
March 3, 2012 at 1:51 pm
It’s not easy to add another LED unless you redesign the PCB…
Using 9V power can be done by using 5V voltage regulator like LM7805.
March 3, 2012 at 5:27 pm