Art and Technology are Friends

Laser Cut Enclosure for Color Organ Triple Deluxe II

I made a laser cut acrylic enclosure for Color Organ Triple Deluxe II.

It’s a very simple design, but very functional. Built with laser cut acrylic and screws and nuts only. No filing, glueing or bending.
You can download the design file, and laser cut 3mm acrylic. I used Ponoko, but you should be able to use any services available.
Use my design as is, or customize as you like.
You will also need four 1 inch, #2-56 machine screws and nuts, such as these.

* The design file is formatted according to Ponoko’s specifications. You might have to modify it if you are using a different service.

10 Responses

  1. Colton Boyd

    Instead of using the LEDs in the Color Organ Triple Deluxe II, how can I wire several LEDs on a line for each channel to install into an acrylic box. To simplify my question, use this kit but have the final output at this,


    September 28, 2013 at 8:24 pm

    • Yes you can solder wires to connect LEDs off PCB.

      September 29, 2013 at 11:57 am

  2. I love the acrylic casing!

    April 5, 2013 at 9:38 am

  3. shoji

    Do you have any plan to sell the enclosure with the color organ?

    March 5, 2013 at 5:10 pm

  4. Bill

    Thanks! Your work is tremendous. I have pointed several of my friends to your page. I hope you don’t mind. Please don’t stop creating or posting.

    Bill Edwards
    Anchorage, Alaska

    February 28, 2013 at 7:03 pm

  5. Bill

    I went to Ponoko to order an enclosure. What size material should I select when I want to have it built? is the 181.1 x 181.1 too small? What is the right size?

    Please Advise

    Bill Edwards
    Anchorage, ALaska

    February 28, 2013 at 4:55 pm

    • That’s the correct size. They call it “P1″.
      Just so that you know there are some extra parts in the panel that are not shown in the picture as well. (for experiments)


      February 28, 2013 at 4:58 pm

  6. shoji

    Looks awesome!

    February 21, 2013 at 3:37 pm

Leave a Reply to The LED Artist Cancel reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>